green Laser 532nm marking machine free sample marking

Array 21 Views
green Laser 532nm marking machine free sample marking
\
532nm green laser output, smaller light spot, more concentrated energy, higher electron-optic conversion rate, higher light beam quality, capable for machining of high reflection or high transmittance materials. Good overall protective function, easy marking controlling.

Main Features

1.Wide material application, remedying processing capacity shortage of infrared laser.
2.Good light beam quality, small focusing spot, capable for super-fine marking.
3.Small heat-affected zone, avoid being damaged by the machined materials, high rate of finished products.
4.High marking speed, high efficiency, high accuracy.
5.Dispense with consumable items, low use-cost and maintenance cost.
6.Stable overall performance, capable for longtime continuous operation.

Application:

Most suitable for glass wares surface engraving, such as cellphone screen, LED screen, optical element(like optical lens), automobile glass, etc. Also capable for most metal and non-metal materials surface machining or cladding layer thin film machining, such as hardware, ceramic, glasses and lens, PC, electronic element, all kinds of apparatus, flexible PCB plate marking or partition, PVC tube stock, metal or non-metal surface cladding layer removal, etc.

MODEL

YL-GL5

YL-GL10

YL-GL15

LASER WAVE LENGTH

532nm

MAX LASER POWER

5W

10W

15W

BEAM QUALITY

M²<1.3

PULSE WIDTH

20ns(20KHZ)

PULSE ENERGY

>0.51mJ

1mJ

1.5mJ

REPEAT FREQUENCY

10-50KHZ

MARKING RANGE

100mm*100mm( DIFFERENT MATERIAL THE POWER IS OPTIONAL)

MARKING SPEED

≤7000mm/s

MIN LINE WIDTH

0.01mm

MIN CHARACTER

0.1mm

Main Features

1.Wide material application, remedying processing capacity shortage of infrared laser.
2.Good light beam quality, small focusing spot, capable for super-fine marking.
3.Small heat-affected zone, avoid being damaged by the machined materials, high rate of finished products.
4.High marking speed, high efficiency, high accuracy.
5.Dispense with consumable items, low use-cost and maintenance cost.
6.Stable overall performance, capable for longtime continuous operation.

Application

Most suitable for glass wares surface engraving, such as cellphone screen, LED screen, optical element(like optical lens), automobile glass, etc. Also capable for most metal and non-metal materials surface machining or cladding layer thin film machining, such as hardware, ceramic, glasses and lens, PC, electronic element, all kinds of apparatus, flexible PCB plate marking or partition, PVC tube stock, metal or non-metal surface cladding layer removal, etc.